USB Car TPMS Tire Pressure Monitor Alarm System/Android Navigation Tire Pressure Monitoring/Wireless Transmission TPMS
Price:
$ 27.70
Specifications
Gross Weight | 0.332kg |
---|---|
Volume Weight | 0.387kg |
Package Length | 16.000cm |
Package Width | 13.500cm |
Package Height | 8.000cm |
Package Weight | 0.297kg |
With Retail Packaging | No |
Product Description
USB Car TPMS Tire Pressure Monitor Alarm System/Android Navigation Tire Pressure Monitoring/Wireless Transmission TPMS
-
Prevent accidents
-
Extend the service life of the tire
-
Prevent air leakage
-
More fuel-efficient
-
Reduce the wear of the suspension system
-
Balance tire pressure to optimize performance
Specifications:
-
External sensor installation:
-
Working temperature: -20℃-60℃
-
Stand-by current: <0.7uA
-
Pressure measurement range: 0-8Bar
-
Emission current: <8mA
-
Internal sensor installation:
-
Working temperature: -40℃-125℃
-
Stand-by current: <0.7uA
-
Pressure measurement range: 0-8Bar
-
Emission current: <10mA
-
Host parameters:
-
Operating voltage: DC 5V
-
Maximum operating current: less than 16mA
-
High frequency operating frequency: 433.92MHz
-
Working temperature: -40°C~85°C
-
Receiver sensitivity: <-105dBm
-
Interface mode: USB
-
Communication line length: 200mm/7.87"
-
Size: 16cm*13.5cm*8cm
Note:
-
Android system installation method:
-
First, the software download
-
1. Please copy https://drive.google.com/open?id=1DoE3ggGxTHmB1C3kYRmArJvreEFBRq6y
-
Link to download tire pressure software or find customer service tire pressure installation software!
-
Second, the software installation
-
1. Please do not plug in the USB receiver before installation. After downloading, please install it. After installation, please do not open it.
-
2. Insert the USB receiver and wait for 5 seconds. A picture will appear on the screen and the check point will be confirmed.
-
3. After the check point is confirmed, the software is displayed in red and the temperature is displayed to prove that the installation is successful.
-
4, install the sensor, please refer to the instruction manual for detailed steps, I wish you a happy journey!
Instructions:
-
1.First screw each sensor to the corresponding tire.
-
2.Each product we will be equipped with a U disk, which is the product of the APK program, the first U disk docking navigation installed APP.
-
3.After connecting the product host to the navigation USB interface, select Trust TPMS device and confirm. Then open APP and wait for the data on the tire.
Package included:
- 1 x Host Machine
- 4 x Internal Sensors
- 4 x Theftproof Screw Nuts
- 1 x Wrench
- 1 x Double Sided Adhesive Tape
- 1 x User Manual