36-LED Waterproof Solar Power PIR Motion Sensor Wall Light Outdoor Garden Lamp

The internal light sensor ensures that the motion sensor is not activated during the day. When the ambient light dimates, the sensor will start. This product is equipped with a lithium battery inside, do not replace it yourself. Do not use household waste or put it near the heat source. You must go to the local battery processing center for disposal. It takes 8 hours of sun to fully charge. The installation location, weather conditions and seasonal changes will directly affect the actual operating time.

• Easy to install and use, energy efficient solar technology.

• Widely used in gardens, garages and other places where sunlight is illuminated

• Fully automatic operation

• It turns off automatically during the day and turns on automatically when you sit at night

Two lighting modes:

• It turns off automatically during the day and only turns on when you feel exercising at night. The light goes out after 30 seconds. If people remain active in the sensor area, the light mode will remain on.

Notes:

• 1. This is a solar product, choose a sunny place to ensure an efficient charge during the day.

• 2. The longer the sun's time, the longer the lighting time. The recommended installation height is 1.8-2.2m.

• 3. Due to the different monitors and light effects, the actual color of the item may differ slightly from the color shown in the pictures. 

• 4. There may be a measurement deviation of 1-3cm due to manual measurement.

Specifications:

• Solar panel: 6V 1.5W

• Battery capacity: 3.7V 220mAh

• LED number: 36-LED

• Protection level: IP65

• Rated power: 3W

• Product size: 230 * 130 * 50mm / 9.06 * 5.12 * 1.97 inch

Installation process:

• Press the button to turn on the light.

• Attach the column hinge to the wall.

• Place the lamp screw hole in the column hinge.

• Pass the screw through the lamp and screw the column hinge.

• The installation is complete.